Industrial Pumps With Self-Cleaning Intakes

Sapphire 600 Filterpumps™

Rotorflush Sapphire Filterpumps™ are general purpose high pressure submersible filter pumps with a built-in self-cleaning suction intake screen. Pump and screen up to 90 m3/hr, 400 US GPM, and to a maximum head of 14 bar, 200 psi.

• Maximum output - 90 m3/hr, 400 US GPM
• Maximum head - 14 m, 460 ft

Price from: £19,020

Topaz 600 Filterpumps™

Rotorflush Topaz 600 Filterpumps™. Medium head general purpose submersible filter pumps with integral self-cleaning suction intakes. They combine pumping and screening, delivering up to 150 m3/hr, - 660 US GPM - and to a maximum head of 4.8 bar, 68 psi.

• Maximum output - 150 m3/hr, - 660 US GPM
• Maximum head - 48 m, 157 ft

Price from: £16,570

RUBI KRS-800AR Range Filterpumps™

RUBI KRS-800AR range filterpumps™ are extremely tough, suitable for heavy industrial applications, and dirty water conditions. They will pump and screen up to 335 m3 / hr, and have a maximum head of 3.4 bar.

• Maximum Output - 334 m3 / hr
• Maximum Head - 30 metres

Price from: £0

Rotorflush RUBI LH-800AR Range Filterpumps™

RUBI LH-800 range filterpumps™ are durable, cast iron, high-pressure water pumps with stainless steel self-cleaning suction intake screens, suitable for heavy industrial applications and dirty water conditions. They will pump and screen up to 390 m3 / hr, and have a maximum head of 17.5 bar.

• Maximum output 390 m3 / hr
• Maximum head 175 m

Price from: £0

Spare RF100 Filter Cages

Spare filter mesh cages for smaller Rotorflush pump suction hose self-cleaning filters. Suitable for Rotorflush models RF100INDQ, RF100Duplex, RF100Triplex and RF100ANQ Analyser filter systems. 60, 115 and 250 micron mesh available.

• Nylon mesh - 60, 115 or 250 microns

Price from: £50

Cos-Phi Load Monitors and Control Panels

Cos-phi control panels and load monitors for dry running protection for Rotorflush filter pumps

• Nastec Control Panels
• Single phase up to 18 Amps
• Three-phase up to 30 Amps

Price from: £309

Rotorflush GT200 Liquid Solids Separator System

The Rotorflush GT200 Liquid Solids Separator provides an easy way to remove and dispose of particulate and solids when moving contaminated water. As water flows by gravity or is pumped into the GT200 liquid solids separator, the separator simultaneously filters out debris and pumps filtered water onwards. Debris and particulate left behind is purged from an outlet below the separator as required, either manually or automatically on a timer.

• Separate Solids from 220 L/Min, 58 USGPM
• Filter From 6 mm down to 50 Microns
• Optional Solid Waste Handling Add-on

Price from: £3,500

Filterpumps™ for Sampling

Self-cleaning filter pump. The O1608-16 sample pump is a low head submersible filter pump with an integral self-cleaning filter for use with on-line analysers and dosing systems. It delivers a filtered output of water which prevents blockage to nozzles, valves and solenoids. Sample water can be screened to 60 microns and pumped simultaneously.

• Maximum output - 220 l / min, 58 US GPM
• Maximum head - 11 m, 36 ft

Price from: £2,295

Spare Mesh and Mesh Inserts

Keep your Rotorflush running at its optimum by regularly swapping nylon inserts or replacing damaged stainless mesh.

Price from: £50